Contact Us Today!
800.321.3741

HOME  |  PRODUCTS  |  HYD SUPER CHARGER  | NEW EQUIP  |  REMANUFACTURED |  PARTS  |  USED EQUIP  |  ABOUT  |  CONTACT

 

HYDRAULIC SUPER CHARGER

BODY OPTIONS

CRANES

TIRE MANIPULATORS & ACCESSORIES

COMPRESSORS

DRAWER SETS


ACI PRODUCT LITERATURE

ACI WARRANTY INFORMATION

 

 

 

 

 


 

HYDRAULIC SUPER CHARGER BY ACI 

The ACI Super Charger System Model MC10A, SC10DA and EC10DA have been in development for many years.  Due to the hi-pressure requirements, it has been a difficult tool to perfect.  John first recognized a need for this tool in 1971, and over the years he has tried several approaches to develop this tool.  John’s persistence has finally prevailed!  At last there is a trouble free tool, which eliminates the agony of air line freeze up and the hassle of trying to keep extra air pots warm by rotating in and out of the heated cab in order to complete a job.

In 2006 the current model of the Super Charger was developed with several units placed in different parts of the world, including Africa, for testing and evaluation.  With only a few modifications, the marking of the present model was launched in February, 2010, at the TIA Annual OTR Conference in Tucson, AZ. John received his Patent Number on September 20, 2014, Patent 8.950.733.

High-Pressure hydraulic hose reel w/45' hose heated oil at all times!! 

  • Will produce 10,000 PSI of hydraulic working pressure for hydraulic jacks and rams
    Connects directly into crane's hydraulic system
  • Four-gallon of hydraulic oil supply dedictated for tools
  • Will operate with a minimum of 6 gpm or a maximum of 40 gpm of hydraulic flow
  • Will operate with a minimum of 2500 PSI to a maximum of 4500 PSI working pressure
  • Pressure and flow will self-regulate
  • Will operate on 12 or 24 volt system
  • Equipped with a 12 or 24 volt thermostatic controlled heat element to maintain warm hydraulic oil
  • All models standard with adjustable flow to the tool
  • Has an in-line filter on return line from the tool to the supply tank

Heavy-duty remote control with magnet

  • Programmable for single or double functions
  • Note: Radio remote control system allows operator to stay out of harm's way.
  • Replacement controls can be easily programmed on the spot
  • Manual override control standard on all units

T-Line with high-pressure shut-off valves and quick couplers for operating two hydraulic tools at one time

  • Single hose reel with 45' of high-pressure hose and quick couplers: standard on SC10 system
  • Note: Single system is pressure up and gravity down.
  • Dual hose reels with 45' of high-pressure hose and quick couplers: standard on SC10D system
  • Note: Dual system is power up and power down, used with 150, 200 & 250 ton jacks and some hydraulic rams.
  • When not in use, the supply lines are connected to a quick-coupler, which has a return line back to supply tank, so that cold oil can be cycled back to tank before operating in cold weather; thus warm oil is in the supply lines for the jacks and rams.
  • Note: Dual system can also be used the same as a single system, with power up and gravity down, by keeping one line connected to the tank return line. 

SC10D dual system standard with dual-pressure read out gauges on front panel

  • Hydraulic flow does not slow down under pressure
  • The ACI Super Charger system completely replaces the air over hydraulic foot pumps and the aggravation of having the air lines freeze in cold weather conditions.
  • No more fighting the tangled air lines and hydraulic hoses being wrapped around other tools; simply pull out the hydraulic hose, connect to tool, and press the remote control button.